Back to all posts
Plant Data7 min read·October 25, 2026

How Can You Monitor a Machine With No Data Output?

TB
ThynkBlox Automation Team
Automation Engineering

You can monitor an old machine without PLC data by adding external sensors for a clearly defined measurement or event. Choose the method around the question you need answered: whether a motor draws current, a mechanism reaches a position, or a part passes a point. Validate the signal against observed operation before using it in reports, and label any inferred production separately from directly detected events.

What do you actually need to know?

Start with the decision the information should support. “Monitor the machine” is too broad to specify a sensor or judge whether it works.

Write a statement such as:

  • Maintenance needs to know when the main motor appears active.
  • Operations needs a count of parts crossing the discharge point.
  • A supervisor needs to distinguish automatic cycling from waiting.
  • Process staff need a temperature reading at an agreed location.

Keep the measurement separate from its interpretation. A current reading is an electrical measurement. “Machine running” is a state assigned using a rule. “Producing saleable parts” is a further conclusion that needs its own evidence.

Define those boundaries before choosing equipment. Otherwise, a dashboard label can promise more than the sensor establishes.

Which sensing method fits the question?

Use this table to shortlist an approach. The limitations are questions to resolve during assessment and testing.

Required informationCandidate approachWhat to establish before accepting it
Motor activityCurrent sensing on the relevant motor circuitCan idle, loaded and stopped conditions be distinguished?
Mechanism positionProximity sensor or position switchDoes the detected position correspond to the event you need?
Parts passing a locationPhotoelectric sensorCan it detect each intended part without counting unrelated movement?
Cycle eventsDiscrete sensor on a repeatable movementWhat constitutes a cycle, and can setup or jogging trigger it?
Temperature or pressureA suitable dedicated instrumentDoes the installation measure the required process condition?
Good production quantityDefined count point plus quality dispositionHow are rejects, rework and multiple parts handled?

Current sensors measure electrical current; proximity sensors and switches detect defined target or position conditions; photoelectric sensors use light to detect objects.

Do not select a device solely because it is easy to mount. First agree what its signal will mean.

When is current sensing useful?

Consider current sensing when motor activity is the information you need, or when you want to investigate whether electrical behaviour can support a useful state estimate.

Assess the relevant circuit rather than treating the machine's entire electrical supply as one signal. Identify which loads it includes and which load matters to the question. Ask whether auxiliaries remain active while production stops.

Do not assume a single current threshold separates production from non-production. Motor current can vary with operating conditions, and an energised motor does not establish that acceptable parts are being produced.

During the trial, compare readings with observed stopped, starting, idle, loaded and stopping conditions. Include different products or operating modes where relevant.

If the evidence supports only “motor activity detected”, use that label. If you develop a rule for “likely cycling”, show it as an estimate and document the conditions under which it was validated.

When should you use discrete sensors?

Choose a discrete sensor when a specific physical event is closer to the information you need: a target arrives, a mechanism reaches a position, or a part crosses a counting point.

Define the event precisely. “Part detected at discharge” is clearer than “production complete”. Decide whether the count occurs on arrival, departure or a complete passage through the detection zone.

Challenge the proposed location with practical questions:

  • Can the same part pass the sensor again?
  • Can an operator's hand, scrap or tooling trigger it?
  • Can parts overlap or pass together?
  • Does manual jogging create the same signal?
  • Is the event still detectable across the intended product range?

Sensor response time and the receiving equipment's input capabilities must suit the shortest expected event.

An external sensor also does not automatically identify rejects. If quality is assessed later, report the event count separately until a defined quality decision can be associated with it.

What installation access must you check?

Treat access as part of the design.

For electrical sensing, establish where the relevant conductors are accessible, what equipment is suitable for the circuit, and what isolation and installation work are required. Have a qualified electrical professional determine the installation method. A clamp-style sensor does not make access to an electrical enclosure a routine operator task.

For external sensors, inspect mounting space, cable routes, cleaning access and maintenance access. Check that the proposed position will not obstruct guards, moving parts or normal work.

Review the environment and the actual target. Oil, dust, vibration, washdown, target material and target appearance can affect sensor selection or installation suitability.

Have any safety-related design or change assessed with a qualified assessor. Keep the monitoring purpose explicit, and do not treat a monitoring signal as a safety function.

Where installation needs a stoppage, include access, isolation, fitting and testing in the plan. The guide to planning a PLC retrofit around a shutdown window offers a useful framework for organising that work.

How do you validate the signal against real operation?

Agree the acceptance criteria before installation. Specify the intended states or events, the operating conditions to test and the evidence required to accept each interpretation.

Use a joint observation session with an operator and the person commissioning the monitoring. Record the physical event and the captured signal together.

Include:

  1. Normal operation: watch the full sequence, not just steady running.
  2. Non-production activity: test setup, jogging, cleaning and empty cycling where permitted.
  3. Product changes: check the intended range of parts, materials and speeds.
  4. Disturbances: examine missed detections, repeated detections and obstructed sensors.
  5. Data interruptions: verify how disconnected sensors and communication loss appear.
  6. Independent comparison: reconcile captured events with an observed count or other agreed reference.

Define “unknown” explicitly. If a signal becomes unavailable, the report should show unavailable data rather than silently assigning a stopped or running state.

Retain the agreed rules and validation record. Put event definitions, ownership and failure behaviour into the functional design specification.

What would a practical example look like?

Illustrative example: a machine has no accessible production data. Operations wants a discharge count, while maintenance wants visibility of main-motor activity.

Trial a current sensor for the motor and a separate part-detection sensor at discharge. During observation, record periods when the motor operates without any part leaving the machine. Also check whether a discharged part can be moved back through the sensor.

Report the signals separately:

  • Motor activity: interpreted from the validated current rule.
  • Discharge events: detections at the agreed counting point.
  • Good quantity: available only after an agreed quality decision.

If each discharge event does not reliably correspond to a single part, keep the event label until that relationship is resolved. Do not multiply motor-active time by an assumed cycle rate and present the result as measured output.

Before using these signals in an efficiency calculation, review what the OEE number hides.

What common mistakes should you avoid?

Starting with a dashboard. Define the measurement and its acceptance criteria before choosing how to display it.

Calling activity production. Keep electrical activity, mechanical events and accepted output distinct.

Testing only normal running. Include the permitted operating modes most likely to challenge the interpretation.

Hiding corrections. Record manual adjustments separately, with a reason, rather than overwriting captured events.

Forgetting maintenance. Assign responsibility for checking alignment, cleaning sensors and reviewing results after tooling or process changes.

External sensing may not suit the requirement if no safe mounting location exists, the required condition cannot be observed externally, or the interpretation remains ambiguous after testing. In that case, reassess the measurement point or the integration approach before expanding deployment.

What are the frequently asked questions?

Can this work without changing the PLC programme?

An external monitoring design can be specified around separately collected sensor signals. Confirm the required wiring, power, installation and data collection arrangements during assessment.

Can current sensing give an accurate production count?

Do not accept it as a production count without evidence linking the detected pattern to output across the intended operating conditions. Even a validated estimate should remain labelled as an estimate.

Does every machine need several sensors?

Start with the smallest set that answers the agreed question. Add another signal when it resolves a specific ambiguity demonstrated during validation.

What should the first assessment deliver?

Ask for a measurement definition, proposed sensing location, access requirements, interpretation rules and a validation plan. These provide a concrete basis for deciding whether to proceed.

For help defining that scope, see our plant automation services or contact us with the machine's operating sequence and the information you need.

Next step

Want to apply this to your plant?

Every project starts with a fixed-fee assessment, and you can stop after the report.